High efficiency plasma inverter cutting (CCC&CE)

plasma inverter cutting 1.Easy to operation 2.IGBT Tech,stable current output 3.Stable,lightweight,energy-saving 4.CCC&CE

plasma inverter cutting

Technical Characteristics

1.Easy to operation,cutting a narrow slit,the notch is good

2.Feed-back circuit is controlled by advanced IGBT Tech,output current is stable

3.Control circuit:the use of high-power IGBT inverter switching devices after the buck rectifier,through the pulse-width modulation,(PWM) output power drive current source,so that the host weight,body weight siginificantly decreased,efficiency increased by 30% or more:it's advantages:a stable,reliable,lightweight,energy-saving,no electro magnetic noise

4.Non-contact arc starting mode without HF,little interference to the nearby electronic equipment

5.With protection functions of short phase,over or low voltage,overheat and low air pressure

6.As the plasma temperature is very high,you can cut carbon steel,high-speed steel,tool steel,alloy steel,stainess steel,cast copper,steel,aluminum and alloys majority of black and nonferrous metals

Technical Parameters

Model	CUT-63S	CUT-100S	CUT-160S	CUT-200S
Rsted input Voltage(V)	380±10%	380±10%	380±10%	380±10%
Power frequency(HZ)	50/60	50/60	50/60	50/60
Rated input Capacity(KVA)	7.9	15	30	40
Output current range(A)	20-63	20-100	20-160	20-200
No-load Voltage(V)	270	270	280	300
MAX.Cutting thickness(mm)	20	35	60	80
Gas flow(m3 /min)	0.16	0.16	0.2	0.25
Efficiency(%)	85%	85%	85%	85%
Air-starting	Non-contact	Non-contact	Non-contact	Non-contact
Class of Insulation	H	H	H	H
Duty cycle	60%	60%	60%	80%
Power Factor(cosφ)	0.93	0.93	0.93	0.93
Protection class	IP23	IP23	IP23	ip23
Weight(kg)	36	40	43	95
External Dimensions(L*W*H)	730*320*580	730*320*580	730*320*580	770*360*810

High efficiency plasma inverter cutting (CCC&CE)